Tuesday, August 17, 2010

Thermal battery test

So I think I'm going to be able to include the battery in this project after all.

Here's the battery sitting under the keyboard (trackpad removed for illustration).


You can see the location of the power LED here too. The IR port is just to the left of that.

Anyway, the battery should fit with a little modification. I'll have to cut a rebate in the back and there's a couple of tabs on the right hand side that feel like they have nothing in them so they can be chopped off as well (I think...don't want to be cutting into lithium with a dremel). I'll also have to extend the power cables as they won't reach the way they are (it's not plugged in in the pic above).

The main issue will be temperature.



Without the battery in there the CPU idles around 45 degrees but with it just sitting on top with a good 10mm of clearance it's hovering between 52 and 55 degrees. That will increase when I lower the whole thing down so it means I have no option but to grab an unused GPU fan from somewhere and hack it in there to keep things cool. I imagine the temps will rise a bit if the CPU/GPU starts working hard (what the thermal tolerance of a lithium ion battery anyway...must look that up)

Yes I could have just left it all in the case the Air came in but there's no fun in that now is there? As for why one would want a big arse battery inside a keyboard...why not?...I wouldn't have to if Apple had a CMOS battery on the motherboard but they don't do that anymore. Plus the motherboard is designed to expect a battery and it works a whole lot better if there is one in there.

On the other hand, how many keyboard computers have a built in 6hr UPS huh?

8 comments:

  1. Keep it up man! Can't wait to see the results. :)

    ReplyDelete
  2. Wow nice work, I really love this keyboard computer concept !
    What are you planning to do with the old macbook air screen ?

    ReplyDelete
  3. Don't listen to the haters man! This project is AWESOME! I wish I had one of my own...

    ReplyDelete
  4. I rly hope apple is looking at this. For its so handy and can be make bette . i'll buy one if the think come in productivity
    Out Casper

    ReplyDelete
  5. Nice job!

    Btw, what is the program you use for temperature monitoring called? :)

    ReplyDelete
  6. Thanks all :)

    René, it's called iStat Menus
    Http://bjango.com/Apps/istatmenus/

    ReplyDelete
  7. If you were able to use an aluminum case like Apple, you'd take care of a decent amount of the heat...maybe that's a future project?

    ReplyDelete
  8. hey man, i am always into this tech mod stuff and I was thinking that should put up a tutorial or how to so that people could create their own!

    ReplyDelete